Simulation via arducopter of MP
@Lefteris wrote: I would like to ask you the following: I'm creating a QGC formated (.waypoints) file including the home position, the take-off command, the waypoints to follow, some other actions and...
View ArticleWhere is distance to HOME in Log?
@dongfang_a wrote: I'm trying to measure my 3DR Radio Telemetry max distance, however, in LOG, I can not find data for "distance to HOME" Or "distance to GCS". is it not existing, or is it another...
View ArticleHeartbeat not received regularly & compare positions
@SalahuddinAsh wrote: My code sends MAVLink messages to MAVProxy via UDP. Everything is working fine but I don't receive heartbeat signals from MAVProxy regularly. Sometimes I run the code and it...
View ArticleFlashing with Mission Planner in virtual machine (tip)
@Anthony_Short wrote: I wasn't able to flash firmware updates to a Pixhawk (1 or 2.1) from MP running in a VMware virtual machine on a Mac. It would just hang every time. I discovered that setting the...
View ArticleNeutral tilt position for gimbal
@andrewmoni wrote: Should the neutral tilt position for the gimbal be set in degrees, degrees(scaled) or centigrees?? Mission planner appears to want degrees whilst tower seems to require...
View ArticleFlash new firmware, and mtd seems like being formatted
@liang-tang wrote: sometimes i flash new firmware to pixhawk, then connect pixhawk to apm planner, i lost both params and waypoint...can somebody explain it ? Posts: 1 Participants: 1 Read full topic
View ArticleAPM 450 Helicopter Tuning
@rfine7666 wrote: Thanks in advanceNewbie to APM helicopter and need some advice. I have used APM 2.6 and 2.8 board for a few years now on quads and tricopters. I have watched videos of APM...
View ArticleArducopter 3.4.6 vdq210 flipping on take off
@awright424 wrote: I have a vdq210 with 20a littlebee opto esc's and emax rs2206 racespec motors. I have pi0 with a diy pxfmini on it. When I arm to take off it flips. I am also using a 4s lipo. I am...
View ArticleAuto landing gear troubleshooting
@rzzahn wrote: The problem that I am trying to overcome, is the landing gear will not deploy until the FC has booted. The reason this is a problem for me, is that my craft gets stored with the gear up...
View ArticleAutonomous quadcopter
@zubair wrote: I have quadcopter F450 RTF assembledSpecification :Main set size: 490mm x 490mm x 140mmDiameter (length between two motors not adjacent): 450mmPropeller size: 10x 4.5 CW &CCWTake...
View ArticleAC_ROLLPITCHTUNING not working 3.5.0 rc5
@christoph wrote: Status : Mission planner 1.3.48 latest and copter 3.5.0 rc5 Found something weird. I'm trying to do roll/pitch tuning PH by using potentiometer on ch6 (description here :...
View ArticleQuadcopter cansat deployment using apm2.8
@zaidshakil wrote: Hey Everyone, So i have a cansat that will be deployed to an altitude of 120m by a water rocket. At the apogee, the cansat will be deployed and the rotors of the quadcopter will...
View ArticleAutotune RC5 - important observations!
@pauljatherton wrote: My Tarot Pro Hexacopter has been performing flawlessly on RC5. Tonight I thought I would have a go at Autotune just to test the feature, and it flagged up a couple of very...
View ArticleCannot Build the Code
@Mustafa_Efe_Cetin wrote: Hi there, I am new at coding. I followed the instructions given on the website but I couldnt make it. Could you help me to compile the code on linux (eclipse)? Posts: 2...
View ArticleClik here to view.
EKF2 Altitude estimation problems
@Anubis wrote: I have several copters running AC 3.4.6 on a Pixhawk 2 (early batch). One of them has some issues with altitude estimation which I am struggling to understand. The EKF altitude...
View ArticleImpossible to land in Alt Hold or RTL
@pirilla wrote: Hello, Maiden flight with recently built Hexacopter (F680 frame) using Pixhawk with 3.4.6 FW and I have problems with Alt Hold and RTL when trying to land. Copter climb suddenly when...
View ArticleDrone flips after motor replacement
@surbi80 wrote: Hi @ all, I'm flying with a PixHawk 2.1 on a F450 frame.Before i had some DJI 2213 motors installed and it was airborne several times.I wanted some more power so i changed the motors...
View ArticleAPM 450 Helicopter Help with Parameters
@rfine7666 wrote: Randy told me I would be better off to post question here.Thanks in advanceNewbie to APM helicopter and need some advice. I have used APM 2.6 and 2.8 board for a few years now on...
View ArticleAutotune in Yaw
@rdesgagn wrote: Hello everyone, My new F550 hex-frame with Pixhawk was drifting in Yaw during the maiden flight. Alt_hold flight mode seemed not too bad so I decided to run Autotune in Yaw only. The...
View ArticleSensor redundancy behaviour in 3.5
@Mad_angler1 wrote: Hi I'm trying to understand how the multiple sensors in the PH2 are handled in 3.5 I can see GPS blending is now sorted but I'm trying to figure out the below and am struggling to...
View Article