Clik here to view.
Going to loiter during auto flight bug
@bendead wrote: Hey guys It's been the second time I had this problem, my copter stop during a survey mission in auto mode and switch to loiter. My setup is an octocopter, controlled by a Dropix from...
View ArticleNTF_DISPLAY_TYPE Missing In 3.4.6
@davidbitton wrote: I have a Pixhawk 1 with Arducopter 3.4.6 installed, and I am unable to find the NTF_DISPLAY_TYPE param. Is this a 3.5.x only feature? Thanks! Posts: 2 Participants: 2 Read full topic
View ArticleClik here to view.
Multiple flyaways in guided - do I need to tune the EKF?
@Clem wrote: I had 3 successive flyaways yesterday while flying in guided mode. The copter darted towards the horizon at high speed until I regained control by switching to LAND mode.In all 3 cases...
View ArticleClik here to view.
Flight log review please
@squirrel_41 wrote: Hi Guys my first post here I wonder if somebody could look at my flight logIts a new quad I just made I was in loiter mode hovering about 1 meter on my front lawn with battery...
View ArticleLoiter (turns) fails to auto sequence
@lobohobo wrote: I need to create missions that will fly through a "survey" of Loiter (turns) waypoints. These missions look correct when built in ground control and are read back correctly from the...
View ArticleClik here to view.
How Can I examine exact EKF Message?
@spirit wrote: 20170514 진동값은 정상이나 3축의 진동값들이 안 맞음.png1366x768 48.1 KB I have EKF-Check 0 and 2 Error Messages. but I have no Idea why this messages pop up. I want to see detail but I cant see it.......
View ArticleRC9 doesn't work if another AUX channel set to 33
@Kirill_Smirnov wrote: Hi there,I have a problem with my Landing gear setup. Will be appreciate for the help.Here 's description of the problem: I have a Pixhawk 2 from the first batch and because of...
View ArticleSend a signal from the Navio2/Arducopter to the Raspberry Pi when changing...
@flyingw wrote: I would like to start a script in the Raspberry Pi when I disarm the quadcopter. Is it possible for Arducopter to send such a signal to the Pi? Thanks, Paul Posts: 1 Participants: 1...
View ArticleGuided mode mount control not responding
@Pedals2Paddles wrote: We're having a problem with the Solo's guided mode mavlink mount targeting. Many of the smart shots use Mavlink MSG_MOUNT_CONTROL to aim the camera. It controls the yaw and...
View ArticlePixhawk2.1 Lost all parameters
@liang-tang wrote: hi all, My pixhawk2.1 lost all parameters, seems like be set to default, but it didnt set it to defualt,i dont know why, someone helps me ? thanks. Posts: 1 Participants: 1 Read...
View ArticleSurvey Flight Suddenly go high!
@RizHuang wrote: Today , I have try a survey flight . eveything seems normal . During the flight , It comes a a erro report that show the EKF_PRIMARY changes to 1 . and at the same time ,the drone...
View ArticleRangefinder Sensor
@Dennison wrote: Hi, anyone knows what does the meaning of instances in Rangefinder.cpp means? I see alot of find_instance , get_instance, state instance, max_instance etc. Can anyone explain it to...
View ArticleBig octa very strange behavior
@zveruga wrote: Hi.I need help to explain strange copter's behavior.While hovering in Loiter mode on 75m in air telemetry has lost, at the same time data logging is stopped and copter began to fall...
View ArticleCopter-3.5.0-rc6 released for beta testing
@rmackay9 wrote: Copter-3.5.0-rc6 has been released for beta testing and should appear in the various Ground Stations including Mission Planner within the next few hours. This release is just bug...
View ArticlePixhawk 1MB flash limit
@DavidTipping wrote: Hi - can someone advise on the best version of copter to use for those still on the older pixhawks with 1mb flash limits please? Has the flash size limit bee passed yet?...
View ArticleHuge Octo not disarming on landing
@corvus_monitoring wrote: Hi,I follow that topic because I have a serious problem related to disarming with AC3.4.I'm on it since several days and i begin to go nuts!!!First I thought it was a refresh...
View ArticleGas-Powered Hybrid-Electric DJI S1000
@ferocity02 wrote: Hey Everyone, Just wanted to share some of the work we have been doing with with LaunchPoint Technologies on their hybrid-electric DJI S1000. They developed the genset using their...
View ArticleMAVLINK message for rangefinder reading
@hci1111 wrote: Hi, which message can be used to geht rangefinder readings via MAVLINK from ArduCopter on a PIXHAWK? Which message is used by Mission Planner as it can show the value? I did check the...
View ArticleSITL and X-Plane
@chrismdn wrote: Hi guys, I am new in this community, I am pretty much interested in the SITL and X-Plane. I wanted to ask a few questions about that. If I understand well I can use the SITL and...
View ArticleClik here to view.
PH2.1: Flip @ start with U11 Hexacopter 3.5.0 RC4
@copterart wrote: Hey guys I need your help - maybe we've found a bug in the software.I had great results with autotune @ 10 Hz at several flight before the weak crash happened . After that i bring up...
View Article