3DR Solo as a platform to play with CANbus
@mike wrote: It seems there are differences between CANbus implementations. I know that CANbus was used on the Solo for some functions but the hardware documentation is sparse. Are there a lot of...
View ArticleError getting from inclusion of new library
@Arden_Kuyumcu wrote: I need to implement new controller which uses some kind of algorithm to solve an optimization problem. I have found one open source codes from somewhere and used it in visual...
View ArticleGPS M8n and PX4
@Carlos_FPV wrote: Hi everyone, fisrst of all, sorry for my english.I have rare problem with my gps ubox m8n and my Pixhawk PX4.The problem is that when I connect the Pixhawk by usb, the gps position...
View ArticleClik here to view.
Tandem Helicopter - Setup challenge
@around wrote: I have always wanted to build a Chinook. With the latest ArduCopter code supporting tandem helicopters, I thought I would build a small test bed. I have used two 250 class frames,...
View ArticleAuto Lanidng retract
@legend1996 wrote: Hello, having a small issue, thinking I am missing something.......I have set up many APM's, Pixhawks and now have put Pixhawk 2.1 on all of my Multirotors. I just finished an 2.1...
View ArticleGPS Glitch and copter flipped forward
@Javiercerna wrote: Hi, I had a crash a couple of weeks ago with my quadcopter (the firmware is V3.5.2). First, I thought it was just a faulty GPS unit, but looking at the Ardupilot docs, it says that...
View ArticleClik here to view.
Mishap testing AC3.5.3
@ChrisOlson wrote: So, here's a 700 class piston helicopter running custom firmware with several enhancements to it, forked from AC3.3.3. It hovers beautifully in Loiter and has flown the AC3.3.3...
View ArticleIs Lidar Lite V1 safe to use?
@SuperJim wrote: I have a Lidar Lite V1, which I was able to get working correctly in PWM mode. However, the documentation talks about an unresolved 13m offset that may spontaneously appear. As far as...
View ArticleGeotagging - missing trigger events in log file
@timvand wrote: Is it possible to collect 47 images, triggered by Pixhawk AC3.5.2 and not have ANY trigger events in the log file? Is there another setting to turn logging on for camera trigger...
View ArticleInstallation Issue
@Jay_Jagtap wrote: Issue details I am following the installation guide as on the http://ardupilot.org/dev/docs/sitl-native-on-windows.htmlI am stuck at this point : Download and make ardupilotUsing...
View ArticleAndroid App for drone
@prasannab wrote: Hi, I am new to Ardupilot, I want to develop android app to control drone. As a initial step i want to send waypoints(mission) from android app to QGroundControl software and check...
View ArticleMotor Mixing Equations
@marcsay wrote: Hi, may I ask where is the motor mixing equations explicitly written in the Arducopter code? I have read in the documentation that the motor mixing is in AP_Motors, but I would like to...
View ArticleClik here to view.
Marvelmind non-gps usage, why doesn't it work?
@sevet wrote: I'm trying to get Marvelmind working on a small indoor quad with a pixracer,I went throgh the pozyx guide here:http://ardupilot.org/copter/docs/common-pozyx.html I used BCN_TYPE = 2 for...
View ArticleSomething wrong with configuration in AUTOMODE (crash)
@SamFR wrote: Hi, When the radio (TX) is out of range and then when the RX recovers the signal, my copter encounters a problem in AUTOMODE. I've done two tests on almost the same missions : one crash...
View ArticleAutonomously Operating from a Moving Platform
@ferocity02 wrote: Hello everyone, I am interested in a project where the drone (quadcopter) operates from a moving platform. This means taking off from, station-keeping, and landing on the moving...
View ArticleRPM Scaling Formula
@223Wylde wrote: I'm currently setting up a TREX 700, and I've got the RPM1 parameter reading the RPM signal wire off the ESC so I can display it on the hud, but not sure what to set the RPM scaling...
View ArticleClik here to view.
Nasty crash copter 3.53
@larryaamati wrote: Loaded a mission onto ph1 and took off in auto mode.everything was working fine.THEN,all hell broke loose the copter was going all over the place and finally crashed onto my roof.I...
View ArticleVehicle Stops executing Mission
@jasonbeach wrote: I am using a companion computer to load missions to Copter and since upgrading to 3.5.2, I've observed some interesting behavior where occasionally after uploading a new mission it...
View ArticlePre-Arm Fail - GPS Blending Unhealthy
@KRCNZ wrote: Hello We have been using GPS Blending for 10 or so flights without issue on Arducopter 3.5.2. During our last session flying we got a pre-arm fail of "GPS Blending Unhealthy" (I dont...
View ArticleClik here to view.
Anti collision in front of the quad 3.5 pixhawk 2.4.6
@felipeviveiros wrote: after trying to use the EZ0 analog sonar in front of my quad with pixhawk 2.4.6 and the EZ0 sonar just does not work from version 3.5. No one has answered my previous topques or...
View Article