@lobohobo wrote:
So, this is my first build...ever. A friend gave me an "old" F450. I kept the E310 ESCs and 2312 motors and I've replaced everything naza with a PixHawk FC, a PH compatible GPS, telemetry radios, etc. I've wired everything up and gone through the Mission Planner Setup wizard, but couldn't get any response from the motors. Accel, Compass, and Radio calibrations all "passed". GPS and ADI in MP both work. Now, I can arm but nothing happens with the motors. PH LED changes from flashing green to solid green and MP shows "arm". Safety switch is installed and safety disengaged. I have the two power wires soldered to the board and the three wire outputs going to the PH Main Out 1-4. My Spektrum DSMX receiver inputs to the PH SPKT/DSM port.
Any ideas on what I might be doing wrong?
Posts: 3
Participants: 1