Using Emlid Reach + M8N Compass
@Stoneman0 wrote: Hey guys (and this might be a dumb question) but is it possible to use Reach RTK AND the Here M8N compass at the same time? Seems the wiring diagrams permit this BUT not sure if the...
View ArticleClik here to view.
Developer documentation need: MOTBAT Log entries
@CLabeck wrote: Hi there, not sure who from the developer base is in the best position to help on this, but I think there might be an opportunity to update the docs on the MOTBAT log entries. I am...
View ArticleSetting EKF origin through MAVLink
@ollenorelius wrote: So I found in the patch notes for AC3.5-rc5 that Do-set-home sets EKF origin, but I can't figure out how to do it right. Mission planner does it well, but when I try to do it...
View ArticleRTL does not land, but loiters
@ozsteel wrote: I had my heli doing a perfect RTL. Then I upgraded to 3.4.6 and it now moves to a point in the sky exactly at the home position but will not land - it just loiters. Here is a log:...
View ArticleClik here to view.
CurrTot is reported too high in Pixhawk log (Mission Planner)
@Bernardo wrote: Hello using 9000mAh LiPo I suddenly realize that the ampere consumption is reported way too high.Example: The Lipo is 6S with a 9000mAh capacity. The flight time is about 17 minutes....
View ArticleGUIDED_NOGPS Takeoff and move forward
@Biswajit1995 wrote: Hey There, I want my copter to takeoff and hover at one point indoors using GUIDED_NOGPS, and I tried this example given in GUIDED_NOGPS Movement But no success after arming the...
View ArticleSetting up TX with centered throttle
@Frontier wrote: Hello, I have an S500 quadcopter with PixRacer running AC 3.4.6. The TX used is a FlySky FS-i6S which has the option for the throttle stick to be either normal or centered. So far...
View ArticleQuad yaw unstable
@Tobinejumi wrote: Please, help me with fixing issue of my quad. It's big one on stretched tarot 650 frame, with Gart ML5010/300KV motors and 16" props. After take off it's randomly rotate around...
View ArticleSpektrum Satellite Doesn't Bind on PixRacer
@cgmadcat wrote: The Spectrum Bind in Mission Planner and QGroundControl doesn't work with PixRacer and any flavor of Arducopter firmware. It is clearly a firmware issue as the latest PX4 firmware...
View Article3.5.0-rc6 Continuous increase on pitch
@Siner wrote: Hello... Fresh on 3.5-rc6 firmware, after a full recalibration my stabilized mode still okbut after a few second on gps mode ( pos hold and loiter ) my pitch orizont bar startto drift...
View ArticleClik here to view.
Drone reach extreme angles (114°) in brake situations
@LiadB wrote: Hey, While testing my drone limits with 3 blades I was experiencing extreme braking maneuvers,the drone goes 114° while the ANGLE_MAX = 4500, which mean it way over the limit. As you can...
View ArticleCopter rolled onto its side on takeoff
@Max.Messinger wrote: Hello, I am trying to diagnose an issue with a quad on 3.4.6. The quad rolled over upon intiating an auto takeoff. I see in the dataflash log that there was an EKF error pretty...
View ArticleClik here to view.
Maiden big X8 octo, approx 17kg
@christoph wrote: Hello to all .. I maidened my heavy octo x8 as written above ... It`s my first pixhawk and it flew on defaults ... had to increase P on roll and pitch a little first, now I have Yaw...
View ArticleQuestion for how to compile px4-v2 with LLVM
@ece_student wrote: Hi, from my observation, its default compiler is gcc-arm-none-eabi. Then, is there a way to compile px4-v2-quad firmware with LLVM? (not for SITL )It seems there are options for...
View ArticleClik here to view.
Compile error: redefinition of 'Display_SSD1306_I2C::~Display_SSD1306_I2C()'
@bnsgeyer wrote: I just synch'd my fork with the copter-3.5 branch and received this error when attempting to compile the code. I had to resolve some merge conflict but the only merge conflict I had...
View Article3.5-rc6 beaks EKF3 with AsteRx-m UAS
@mboland wrote: Pixhawk2.1Octo, U5's w/15" propsSeptentrio AsteRx-m UASPingSF11 AltimeterRFD900 micro I have been using and tuning on 3.5-rc4 with good success.Updated to rc5 when it was released but...
View ArticleGPS on map not the same location?
@cyclops wrote: Hi, I've only started recently with ArduCopter and took a 'cheap' approach with a APM 2.8 (from UnmannedTech.co.uk).The board is configured and the Painless360 video's have been a...
View ArticleCOPTER 3.5 RC6 handling engine fail with success OR true false
@kuspower wrote: I have experienced in spite of myself an engine / esc failure en hexa, and all proceeded as planned:engine placed on the failed one has been cut, then the four remaining engines have...
View ArticleA weird crash...So weird
@RizHuang wrote: Actually I am so confused of this crash.10.BIN (375.9 KB) Posts: 2 Participants: 2 Read full topic
View ArticleCopter 3.5.0-RC6 autotune problem
@tegwin wrote: So I updated from RC4 to RC6. In RC4 auto tune seemed to work ok. In RC6 the auto tune process ran for about 35 mins before I got some sounds from the drone. (I assume this means its...
View Article