Clik here to view.
MAG2.(X/Y/Z) not changing in log. MAG/MAG3 is fine
@Sunit_Pal wrote: I have PH2 with a here GPS/Compass module installed on my vehicle. It always works fine but in one of the flights I had this issue. MAG2.(X/Y/Z) has fixed value in the logs and is...
View ArticleProblems with GPS not activated
@Canarias-Stock wrote: Hello everyone with any version of apm 2.6 or 2.8 and e tested more than 4 brand new apm, also more than 4 new GPS the problem turns out that everything is working correctly,...
View ArticleCan limits maximum horizontal speed in Alt-POS hold/sport mode?
@Ms123 wrote: My quad is overpower can i setting maximum horizontal speed in Alt-POS hold/sport or drift mode? for safe fly.hover throttle spot is 0.27 by Auto learning hover.S500 frame850kv...
View ArticlePixhawk + Marvelmind. BCN_TYPE, GUIDED_NOGPS (ARDUCOPTER)
@joseocasio wrote: Hello, I have been working on trying to have an ArduCopter fly autonomously using DroneKit for the past 2 months.And I need some clarifications/help First, let me do a summary of...
View ArticleWhy no automatic altitude reset on arming?
@Andre-K wrote: I am doing some altitude-sensitive missions, using WP storing along the way. Sometimes relative takeoff altitude is 7 meters (drifting while preparing payload), sometimes much...
View ArticleEKF2 IMU switching to compass x Messages
@jimloss wrote: 3DR SoloOpenSolo (Copter 3.5)PH2.1 (Green Cube) Installed the PH2.1 cube to replace the PH2.0 cube. Getting messages in logs "EKF2 IMU switching to compass 1" and "EKF2 IMU switching...
View ArticleArducopter running on OcPoC Flight Controller from Aerotenna
@Eric_Wikramanayake wrote: Does anyone have any experience using Arducopter on the OcPoC flight controllerfrom Aerotenna? aerotenna.readme.io What is OcPoC The Revolutionary SoC Flight Controller...
View ArticleProblem with GPS
@Kudykam wrote: Hi,long time ago I used to have about 15 satelites on my copter with u-blox m8n. Now I have new copter and new m8n and have outside about 7-8 stats. Inside about 7. I read about...
View ArticleAccelerometer calibration timeout [APM2.0]
@Marooned wrote: Hi thereAfter 5 years of break I've decided to blow the dust off my APMs. I have APM2.0 for quadrocopter (mounted and ready) and APM2.5 for plane (still waiting to be assembled).I've...
View ArticleClik here to view.
Copter Code Merge conflict
@satyasrmist wrote: I am facing merge conflict with Copter-3.5.2 code. I had forked Ardupilot repo to my git account and was using branch copter-3.4.5. I could successfully merge to 3.4.6 without any...
View ArticleAutotune not start on 4S battery
@Ms123 wrote: Autotune not start on 4S battery but when change to 3s it work autotune started. my quad auw 1.8kgpixhawk4010 850kv10x4.5 prop4s and 3s battery Posts: 2 Participants: 1 Read full topic
View ArticlePublished Frsky Mavlink Passthrough Protocol spreadsheet contains an error
@Eric_Stockenstrom wrote: Hi Guys I thought you would want to know that the spreadsheet defining the Frsky Mavlink Passthrough Protocol linked on this page...
View ArticleHow many satellites needed to synch GPS' to fly
@alandal wrote: I bought two of 2450GPS. I noticed the second drone took much longer to synch than the first. Then I found on android app, it would need to lock on 10 satellites to claim the GPS lock...
View ArticleQUAD - RTL mode - RCOU.C1 and RCOU.C2 diverging
@Alexis_Frerejean wrote: hello my copter is Quad so ESC are connected to my PX4 v3 running copterV3.5.3. Last November 1st, my copter crashed. Having a look to Logs 30.BIN , i see that RCOU.C1 and...
View ArticleTeraRanger Tower mounting
@parthdcool wrote: I want to use the teraranger tower for obstacle avoidance. Is there a spific way in which the tower is to be mounted in. meaning which sensor should face which direction. Also can...
View ArticlePlease an answer on external I2C and Canbus on P2.1
@Corrado_Steri wrote: Hello, as the title says i really am confused about external I2C and canbus on Pixhawk 2.1. Should they already work on 3.5.3? they shouldn't? I read different opinions and read...
View ArticleClik here to view.
Sky Viper finally in the UK
@Jagger wrote: At last I've managed to snag one now that stocks are in the UK.Only one supplier so far but at least you can now get one. - £130. smythstoys.com Sky Viper Streaming Drone with GPS -...
View ArticleClik here to view.
SkyViper V2450GPS at Costco in Australia
@tridge wrote: A friend of @Leonardthall saw this at costco in Australia nice to see it arrive down under! Posts: 1 Participants: 1 Read full topic
View ArticleArducopter\Pixhawk hardfault on bootup (custom firmware)
@nbrakeES wrote: I uploaded a customized version of the ArduCopter 3.5.0 code and am getting a hard fault during boot-up that prevents me from connecting through the USB to flash a different firmware....
View ArticleStatus extra led
@Henrymunoztorres wrote: Hello, I would like someone to help me with a question, I have a 2.8 apm, with firmware 3.2, the doubt is that today lit a led that I think I have not seen before, apparently...
View Article