Clik here to view.
AnySense Pro with Pixhawk connection problem
@mactadpole wrote: I recently received one of the new AnySense Pro telemetry modules so I could use my FrSky S.port sensors with my DragonLink V3 TX/RX telemetry system. Specifically I want to be able...
View ArticleDoes GeoFence override GPS check setting?
@arttd wrote: Hi Folks,I'm testing the X8 clone I just finished building. Testing is being done inside, so obviously I have the GPS Check turned off. So, here's my question... If I enable geofence,...
View ArticleGuided Mode broke in current 3.4 dev (74121..)
@iseries wrote: Using Tower App and taking off in Guided mode works just fine. Then picking a spot on the map to fly to here causes copter to fly to ground level and sit. Mike Posts: 1 Participants: 1...
View ArticleDragon, minimosd, pixhawk help
@eyber wrote: Hi again. I have a question. Sorry for my bad english. I have dragon V2 micro rx and 3DR minimosd. I want to see RSSI value on my ground station.I did connection and setup but I dont...
View ArticleCan't find INAV_TC_Z
@sn0west wrote: I have a drop after going forward in althold. I need to change my thr_mid and maybe the INAV_TC_Z from 5 to maybe 6 or 7. I can't find the option if I search for it in the full...
View ArticleToo sluggish movement in Loiter
@newmafi wrote: Hello, gentleman! Recently I've changed my FC from Dji to Pixhawk.Have been studying hard and thanks to many useful guidances from here and there,finally I come near to the complete...
View Article640 size quad lot's of inertia
@gzinga wrote: Hello I have a 370 quad with a naza mv2 and i just build a 640 size with the pixhawk. the 640/pixhawk seems to be very sluggish when responding to commands, meaning if I input some...
View ArticleHelp with collision avoidance
@ShFu wrote: First of all, hello to everyone.This is my first post in this site, as I just discovered Ardupilot a couple of weeks ago.Right now I'm trying to do a school project with a drone and some...
View ArticleZiegler-Nichols tuning for APM2.6
@tommy1980murf wrote: Hi Guys,This my first post on the site, I have been a long time reader.I am looking to tune my quad using the Ziegler-Nichols method. The problem is that I need to get feedback...
View ArticleStarting Copter-3.4 beta testing soon
@rmackay9 wrote: We are planning to start Copter-3.4 beta testing within a week. We think that some EKF2 updates from Paul Riseborough and Tridge over the weekend have mostly resolved the unstability...
View ArticleArducopter 3.4 TradHeli Support
@Rob_Lefebvre wrote: Hello all, I just want to make it clear, I am no longer able to support TradHeli releases starting with AC3.4. This has occurred because of 3DR discontinuing support of AC...
View ArticleHexaCopter wrong in arming
@vasco wrote: I am a student at UClan Cyprus and currently working on a drone project but I am facing some problems. I have got an ArduPilot 2.5 and the frame type and parameters that I am using are...
View ArticleClik here to view.
Pixhawk Lite - AltHold issue on WOT
@Piet wrote: Hi,I built in a PHL V2 in my quad now...All works pretty fine, BUT when flying very fast in AltHold or PosHold the aircraft looses high!Slowly but constant.... Barometer got no errors and...
View ArticleControl, Navigation, and Obstacle Avoidance Simulation
@wilselby wrote: Hello everyone, I have put together some fairly comprehensive tutorials and videos covering control system design, simulation, and implementation through 3d mapping, path planning,...
View ArticleDangerous altitude climb
@jaredm wrote: I was flying my copter in loiter mode in pretty strong wind. Every once in a while the altitude would shoot up. My copter would take off like a rocket. The logs show that it knows its...
View ArticleNeed help with AUX Outputs for Servo Control
@Paul-H wrote: Hi all I need some help getting servos connected to the AUX ports on my Pixhawk working I am running AP3.3 I am using a 10 Channel receiver running in PPM PPM out is connected to RCIN...
View ArticleMotor speed- ArduPilot 2.5 Hexa V3.2.1
@vasco wrote: I have Ardupilot 2.5 with hex firmware. How can I change parameter for the motor round. The drone do not takeoff and I think it doesn't take the appropriate power to take off!! I am...
View ArticleSetting up the TX1
@rmackay9 wrote: I've got a J120 board from Jurgen at Auvidea.ea and a TX1 board. The J120 board seems to work pretty much as advertised. It's small enough to fit on a medium sized quadcopter (won't...
View ArticleAltHold Algorithm Bug
@buckker wrote: Hello FriendsI posted my problems in connection with overshooting in the AltHold mode a few months ago on DIYDrones. But nobody really listen... Today I did some aerial footage for a...
View Article3DR Iris + Crashed after 3 successful waypoints mission
@ankitsarvaiya1 wrote: Hi all, Could someone point out what went wrong with my flight today? I've had three successful flight before this and during my last flight, quad copter went into a crazy side...
View Article